What is Briquette Press Machine?

Briquette Press Machine is a Machine used to recycle Biomass waste into High Calorific Fuel Briquettes. Briquetting can be done to agricultural and Forest Waste with a maximum moisture content of 8-12%. The Biomass waste with higher moisture is dried and moisture is reduced up to 25% in Flash Dryer and  above 25-50% is in Rotary Drum dryer and is than pulverized to small particles with hammer mill Grinder and fed to Briquetting Press with the help of Hopper. Briquette are Extruded continuously and cut to required length with the help of Cutter.  The LEHRA® high performance machines feature a sturdy construction, which guarantees constant briquette-quality in continuous operation.

Briquette Press Machine Range

Things To Remember

  • 5 Years Crank Warranty
  • Annual Oil Changed
  • Machine Comes With Oil Filled
  • Bush Heat Sensors
  • V-Belt Driven Machine
  • Access Production then Market With Same Power
  • Fully Machine 10 – 12 hours First in India

Lehra Briquette Press LBP 100 (2500 kg/hr)

Lehra Briquette Press LBP 90 (1500/2000 kg/hr)

Lehra Briquette Press LBP 80 (1500 kg/hr)

Lehra Briquette Press LBP 70 (1200 kg/hr)

Lehra Briquette Press LBP 60 (1200 kg/hr)

Lehra Briquette Press LBP 50 (600 kg/hr)

Lehra Briquette Press LBP 40 (150 kg/hr)

Lehra Briquette Press LBP 30 (125 kg/hr)

Briquette Press Machine Features:

Briquetting Press is die and punch type mechanical press with two Ry wheels. One Ry wheel is driven by belts with Motor. Filtered & cooled lubrication oil is supplied by pump through p.pipes. Material is continuously fed through a hopper by means of a vertical feeder with its own gearbox and a motor. Regulated feed to the press is provided by independently driven screw through Rexible pulley/drive on motor. From feeding chamber material is compressed by ram through taper bore die. Briquettes comes out from cooling line. Total process is Continuous & Controlled by panel. Briquetting Press is used for binder less production of high density fuel briquettes i.e. “biocoal” from all types of degradeable biomass. Residues & wastes such as groundnut shell, wood waste, baggasse (sugar cane stalk), cotton shell/stalk, mustard husk/straw, coQee husk, pine needle, saw dust etc. Acceptable moisture in raw material of briquetting is 8-12%.

 

Briquetting Press Models

100MM
114 hp
2500 kg/h
90MM
86.5 hp
2000 kg/h
80MM
71.5 hp
1500 kg/h
70MM
59 hp
1200 kg/h
60MM
47 hp
900 kg/h
50MM
35 hp
600 kg/h
40MM
18 hp
250 kg/h
30MM
13 hp
125 kg/h

How Briquette Press Works?