MANUFACTURING PROCESS

  1. Raw material like Saw Dust Is screened and stalk  (Forest & Agro waste) are chopped by cutter chipper cum Grinder (Single Action).

  2. For using material of two or more types, It should be mixed in suitable form.

  3. If raw material has high  moisture it should be reduced by Sun drying or using flash drier.

  4. Hammer mill grinder is used to grind the material to get desired grain size.

  5. Raw material (desired grain size) is transported by pneumatic system to holding bins fixed over Briquetting Press. Dust is collected by cyclone.

  6. By Screw conveyor , material is discharged from bin to the press.

  7. Material is compressed by ram through taper bored die . By compression temperature is raised &  lignin come to the surface and binds the material by its natural binder.

  8. Briquettes are formed in shape of log (60 mm dia.) and it is automatically pushed through  cooling  line to the storage point.

    Plant requirements
     

Briquetting machine

32 mm.

150 kg. / Hr.

 Grinder

40 mm.

 300 kg. / Hr.

 Flash Dryer

50 mm.

 600 kg. / Hr.

 Material handling

60 mm.

 900 kg. / Hr.

 Chipper Cum Grinder

70 mm.

 1200 kg. / Hr.

 V. Screens

90 mm.

 2000 kg. / Hr.

  • Materials With bulk Density : 180 kg /cubic meter